Rigging

Barton Marine Genoa Slide w/Loop f/32mm Track [32 301]

Genoa Slide with Loop for 32mm TrackHave a heavy-duty stainless steel attachment loop, through-bolted and riveted for extra strength. These units will accept most Barton blocks. A popular range of genoa cars and sliders designed to run on a 32mm (11/4")...

Barton Marine Size 5 - 4:1 Boom Vang System [05 900]

Size 5 - 4:1 Boom Vang System Upgrade your existing vang system or use as a boom preventer.  Snap shackle fixings allow for quick and easy deployment.  Professionally spliced and assembled. Compatible With:Boats up to 35' (10.7...

Taylor Made Tidy-Ups Boat Dock Line Holder - Standard Rails [1101]

Tidy-Ups Boat Dock Line Holder - Standard RailsFeatures:Rail mount UV resistant vinyl strap securely holds rope, cords, etc. Fits 1" - 1-1/4" RailsNot sold in pairsWARNING: This product can expose you to chemicals including...

C. Sherman Johnson Stanchion Eye f/1" Stanchion [29-502]

Stanchion Eye for 1" StanchionThis fitting is used on a stanchion for adding lower life lines without the need to drill holes for the cable to pass through. (5/16" hole).

C. Sherman Johnson Eye to Deck Toggle Fitting [LS-2550]

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

C. Sherman Johnson Eye to Eye Adjustable Fitting [22-100]

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

C. Sherman Johnson "T" Style Toggle Jaw f/1/8" Wire [26-415]

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

C. Sherman Johnson "T" Style Deck Toggle f/1/8" Wire [26-415-1T]

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

C. Sherman Johnson Interlocking Swivel Gate Eye f/3/16" Wire [27-410]

Interlocking Swivel Gate Eye for 3/16" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.

C. Sherman Johnson Single Swivel Gate Eye f/3/16" Wire [27-409]

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

C. Sherman Johnson Snap Gate Hook - Body Only - 5/16" - 24 Right Hand [21-80-1]

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long from end of body to inside bearing point of hook. Specifications:5-16"-24 RH

C. Sherman Johnson Over Center Snap Gate Hook f/3/16" Wire [27-886]

Over Center Snap Gate Hook for 3/16" WireThe over center design has no load on the swinging hook when closed. This feature allows easy opening, yet stays secure with a heavy split ring on the plunger latching devise. Investment Cast T-316 Stainless...